What’s New

Advanced Polymer, Inc.

• API-295 E new low VOC film-forming emulsion that provides water, oil, solvent and food stain resistance on concrete, masonry, natural stone and pavers
  
• API-Green 1000 penetrating sealer for exterior and interior wood surfaces. The product is comprised of renewable raw materials (>95%).
  
• API-Green 2001 water based, single component, clear, protective barrier, enhancing sealer for joint sand stabilization. This product is biodegradable.
  
• API-Green 2008 non glossy durable protective coating that enhances the appearance of concrete block, tile, slate, brick and terra cotta. This product is comprised of renewable raw materials (>95%).
• API-279 low VOC, waterborne fluoropolymer resin for use as a high performance concrete/masonry sealer. The cure coating will have great adhesion and durability with excellent hot tire pick-up resistance and superior water, oil and food stain resistance.
  
  
  BYK

• BYK 012
  VOC free defoamer
  
• BYK 1770
  VOC free defoamer that prevents microfoam in water based coatings with good transparency and high gloss.
  
• BYK 430
  Liquid pseudoplastic rheology additive that is recommended for epoxy and 2k polyurethanes.   Possible replacement for polyamides and castor oil derivatives.
  
• Nanobyk
  Alumina and zinc oxide nanoparticle dispersions

• LP X 20637 and LP X 21082
  Alumina dispersion for use in PUDs and water based coatings to enhance scratch resistance.   The dispersions will have very little effect on haze and gloss.
  
• Nanobyk 3820 20nm ZnO in water
• Nanibyk 3840 40nm Zno in water
• Nanobyk 3840 40nm Zno in water
Zinc oxide nanoparticle dispersions for UV protection

Evonivk Degussa Engineered Carbons

• Printex F 138
  FDA approved furnace grade carbon black that can be used to substitute Russian channel blacks.
• Nerox 305 and 505
  New oxidized furnace carbon blacks with low mill base viscosities and blue undertones.
  

Scott Bader

• Texicryl 13-095
  Styrenated acrylic emulsion for use in DADE COUNTY approved elastomeric roof coatings.

Borica

• Tytan Ap 100 and Ap 20
  The Tytan adhesion promoters are widely used in solvent based inks for printing on polyolefin packaging films.   The AP100 will reduce yellowing of the inks compared to competitive products. AP 100 will increase gloss or have no detrimental effect.